| Mon | Tue | Wed | Thu | Fri | Sat | Sun |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | ||||
Perfect condition MOTU 828 MK II. Used only a few times in home studio. Smoke free environment. Works on Mac or PC. I have the manuals.
Here’s some info on it in case you don’t know about the 828
The MOTU 828mkII contains everything you need to turn your Mac or PC computer into a powerful 24-bit, 96kHz digital audio workstation. The 828mkII provides 20 inputs and 22 outputs, including 10 channels of pristine 96kHz analog recording and playback, combined with 8 channels of ADAT digital I/O and stereo S/PDIF I/O. The two XLR inputs feature analog, pre-amplified sends which allow you to insert your favorite outboard EQ, compressor, guitar amp, reverb or other effects processor before the signal goes digital. Use any input as a return. You can add additional send/return loops using the 828mkII’s CueMix DSP on-board mixing feature, a flexible DSP-driven 20-input/8-bus mixing and monitoring matrix eliminating the need for an external mixer. Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines, and even effects processors. Then monitor all of these live inputs via the 828mkII’s main outs, headphone jack or any other output with no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs, headphones, and other outputs.
Features:
CueMix DSP near-zero monitoring system
Access any 828mkII setting directly from the front panel
Multiple monitor mixes for the main outs and headphones with no latency
2 XLR mic pre-amps with switchable 48-volt phantom power, front-panel trim controls
Each XLR in features a 1/4″ send
8 1/4″ Balanced In and Outs
1 MIDI In and Out
1 1/4″ Programmable Punch In/Out connection
1 1/4″ SMPTE In and Out
2 FireWire ports
1 S/PDIF In and Out
1 ADAT Sync In
24-bit ADAT optical input and output
ADAT features 8 channels at 44.1/48kHz and 4 channels at 88.2/96kHz
1 BNC Word Clock In
1 BNC Word Clock Out
Sample-accurate digital transfers between ADAT digital tape decks and the computer via the ADAT sync port
Sample-accurate MIDI
Front panel volume control for main outputs
Front panel headphone jack with independent volume control
Front panel meters for all analog, digital, and MIDI I/O, plus SMPTE sync latch and lock LEDs
Dedicated front panel clock status LEDs
Tags: apogee, audio interface, duet, firewire, logic, Motu 828, pro tools
Stats:
Email This Post
Print This Post